Name: 低熔点琼脂糖
Brand: ACTGene Model: 低熔点琼脂糖
Orginal: TW
Price: 0 Quantity: 2
Promotion: No
| Add to Favorite |
IntroductionHigh quality Low Melting Point Agarose with ultra competitive pricing
Description：
Infinigen Low Melting point (LMP) Agarose is a Low Melting and gelling point agarose producing gels with great sieving properties and higher clarity when compared with standard agarose. LMP Agarose is ideal for in-gel manipulations which can be performed without prior extraction of the DNA from the gel slice. Manufactured using innovative Organic Solvent Free Manufacturing process that is greener and more environment friendly.
zoom in
Application： Ideal for preparative DNA and RNA electrophoresis, the recovery of DNA and RNA, cloning of tissue culture cells and viral plaque assays. Ideal for PCR product separation and blotting and analytical electrophroesis of DNA and RNA fragments.
Storage ：store at room temperature. Keep dry.
Size : 1 g, 5 g, 25 g, 100 g, 500 g, 1 kg, in bulk
Features：
‧ Low melting and gelling point agarose
‧ Ideal for nucleic acid recovery, cloning, analysis, blotting and in-gel enzymatic processing
‧ Greener agarose choice
‧ Ultra high resolution with high clarity
‧ No detectable nuclease and protease
Specifications：
Product Name LM Agarose, Low Melting
CAS 39346-81-1
Appearance White to off-white powder
EEO(-Mr) < 0.1
Gelling point 26℃─30℃（1.5% Gel）
Melting point < 65℃（1.5% Gel）
Solubility clear colorless solution at 2g in 100ml water
Moisture <10%
Gel strength > 200 g /cm2 (1% Gel)
Sulfate < 0.1%
Ash < 0.5%
DNase NONE
RNase NONE
Protease NONE
Endonuclease/ligase inhibitory factor NONE
Gel Preparation Protocol
1. To make gels with agarose concentration less than 2%:
(1) Use a flask that is 2 to 4 times the volume of the solution being prepared.
(2) Add the correct amount of dry agarose to a measured quantity of electrophoresis buffer.
(3) If use a boiling water bath：
‧ To melt the agarose, simply by heating the slurry in a boiling water bath, bring the solution to a boil and allow it to boil for 5-10 minutes stirring continuously, until the agarose dissolves completely.
If use a microwave oven：
‧ To melt the agarose in solutions of less than 2%, heat the slurry in microwave oven on high power setting until it starts to boil.
‧ Allow the solution to boil for 1 min or until the solution is clear and all particles are dissolved.
‧ Remove the flask from the microwave oven, and gently swirl to mix the agarose solution.
Use caution when handling as solution may be extremely heated.
(4) Cool the solution to approx. 60°C before pouring.
2.To make gels with agarose concentration greater than 2%:
(1) Use a flask that is 2 to 4 times the volume of the solution being prepared.
(2) Add the correct amount of dry agarose to a measured quantity of electrophoresis buffer.
(3) Heat the slurry in a microwave oven on a medium power setting until it starts to boil.
(4) Remove the flask from the oven and gently swirl to resuspend the gel particles.
(5) Reheat the solution on a medium power setting until it starts to boil again.
(6) Afterwards, remove the flask from the microwave and gently swirl.
If the agarose did not completely dissolve, reheat the solution again.
(7) Cool to approx. 70°C before pouring.
Separation of DNA in agarose
DNA size range (bp) 500 ─ 25,000 300 ─ 20,000 200 ─ 12,000 150 ─ 6,000 100 ─ 3,000 50 ─ 2,000
Agarose in gel (%) 1 ╳ TAE Buffer 0.75 1.00 1.25 1.50 1.75 2.00
Agarose in gel (%) 1 ╳ TBE Buffer 0.70 0.85 1.00 1.25 1.50 1.75